The DT-QXM uses a laser to illuminate a holographic reticle pattern embedded in the display window and forms a virtual image of a reticle pattern. The shooter looks through the display window and sees a bright red image of a reticle pattern projected onto the target plane. No light is projected onto the target plane.
Optical magnification: 1 X Distance of pupil: Infinity Window material: optical solid glass Window size: 30*23mm + 1mm Window coating: in line with the national standard for anti glare (Anti-glare) and anti fog requirements. Field of view (at 100 meters): 30 m target width can be observed at 10 cm out of pupil distance.
Reticle type: parallel red light back projection, and support (NV) projection function. Daytime brightness adjustment range: 146000:1 (brightest to darkest cursor) supports 20 segments of brightness adjustment, of which the first segment is darkest and the 20th segment is brightest (middle brightness at startup) Night vision mode brightness adjustment range: 1280:1 (cursor brightest to darkest) to support 10 brightness adjustment, of which the first section is the darkest, the 10 section is the brightest. (night vision mode needs to be seen through night vision equipment).
Battery type: CR123Ax1 can be used continuously for 500 hours (brightness is set to the second gear in the daytime, battery capacity is not less than 800 mAH) under the condition of full charge; Parallel red light back projection, support night vision (NV) projection function. Weak power warning: When the battery power is lower than 20% (battery voltage is lower than 2.9V), the cursor flashes to indicate that the power is insufficient. Automatic power on/off: When it is turned on, if there is no operation for more than 8 hours, it will automatically turn off (the shutdown time can also be set to 4 hours).Adjustment Range: +/- 40 MOA Adjustment (per click): Approx. 0.5 MOA (1/2” (12.7mm) at 100 yds (91m)) when ZeroingCard slot: Can be used with 95-type tactical guide rail (national army standard). Locking method: Rotating threaded locking Disassembly accuracy: 1-2 MOA.Appearance: The whole system is black matte, and the surface is treated with anti-glare and extinction. Sealing: anti-fogging of the internal optical system (need to evacuate and fill with nitrogen) Dimensions: (L x W x H):95×55×65mm. Weight: mounts with card slot ≦230g (without batteries and accessories).1.Packing : Holographic sight X1 CR123A X1 Wipe the mirror cloth. 2. Laser safety: The safety level of holographic sight belongs to grade II. When the illumination light of safety level II is completely blocked, the eye can only see the virtual image of the laser marking reflected into the observation window, and its energy is in the laser product level IIa. If the shell breaks, the eyes may see the beam of illumination. Please turn off the gun power immediately and send the broken gun to the factory for repair. 3.Conservation: Your holographic sight is a precision instrument that needs careful protection. The following considerations will help to extend the service life: 1) The optical system and windows are coated with anti-reflective materials. When cleaning the glass surface, the dust on the surface is blown away first. The fingerprints and grease stains can be wiped with lens paper or soft cotton cloth. Before wiping, the surface is wetted with lens cleaning liquid or glass cleaning water. Be sure to wet the surface before cleaning. Do not use dry cloth or paper towels to clean the surface of the glass. 2) all movable parts are permanently lubricated. Do not add lubricating oil to yourself. 3) there is no need to maintain the gun aiming surface. Occasionally use soft cloth to wipe it. Only water based cleaning fluids, such as glass cleaning fluids, ammonia or soapy water, can be used. Do not use solvent cleaning fluids, such as alcohol or acetone. 4) do not disassemble the optical components of gun aiming, which are filled with nitrogen and sealed anti fog treatment. 5) the protective cover is pre installed in the factory and can not be moved. If the hood is in need of maintenance, please contact our service department. 6) private dismantling will no longer give quality assurance.The company provides customers with a one year free warranty period. Once the product is found defective or defective, the company will immediately repair it or replace it. The Company shall not be liable for any damage or associated damage to the product caused by improper operation, unauthorized disassembly, installation, maintenance, abnormal use, or unauthorized modification.Environmental specifications: meet the requirements of the national military standard. Waterproof requirement: IP67. Underwater 1m, 30 minutes. Use temperature: -40 C ~+65 C. Storage temperature: -50 C ~+75 centigrade. Impact resistance: >1000G 5HzPress the arrow up button to turn on the sight. The default mid-range at startup. Each time the sight is turned on, it will automatically detect the electricity (when the battery is not enough. If the power is not enough, less than 20%, the marker in the observation window will flicker and last for 5 seconds, reminding the user to replace the battery. If the power is above 20%, the marking pattern will show a stable image without flickering. In normal use, the system will also check the power at any time. At the same time, press the up / down two brightness adjustment arrows to turn off the machine. Verify that the sight is on/off by looking through the heads-up display window for the reticle. The holographic sight has the function of automatic closing. After normal start-up, press the up and NV button for 2 seconds at the same time, and it will be closed automatically after the last button operation for 8 hours. After normal boot, press down and NV button for 2 seconds at the same time, it will be automatically closed after the last button operation for 4 hours.Remove the battery cap by turning the cap counterclockwise until the cap pulls away from the battery compartment . After the battery cap is removed, slide the battery out and replace it with a fresh one. A “+” marking can be found on the top of the battery cap ensuring correct battery orientation. To reinstall the battery cap, align the cap with the battery compartment and carefully begin to thread the cap, turning it clockwise. Before you begin tightening the cap, make sure the threads are aligned correctly to avoid cross threading. Verify correct battery installation immediately by turning on the sight and checking if the holographic reticle appears.- 1. Holographic gun aiming uses a CR123A lithium battery. If the battery is misused, the hologram gun will be damaged.
- The brightness of the pointing line does not fade with the power consumption, but maintains at the same brightness level. But the sight will suddenly die out because of the exhaustion of electricity.
- When the power is not enough, the partition light mark in the viewport will flash when the power is turned on. For large guns with recoil, this happens when electricity is low.
- If the hologram light mark suddenly starts flashing when the state is closed, please replace the battery.
- Some brands of batteries decline faster due to the vibration of recoil.
- Replace a battery of new batteries before each task.